Home << Product Main << Wireless Main

2.4GHz Wireless All-weather Daynight Two Camera Monitoring System

Supports up to TWO cameras that wirelessly transmit to a receiver that you can place in a comfortable position in your home, office, bedroom, etc. Its also possible to control both cameras with a remote control! All that you have to do is set up the cameras, plug the receiver into your television or VGA capable monitor plug in the power and you are ready and prepared to see anything coming your way!


click to enlarge...click to enlarge...

click to enlarge...click to enlarge...click to enlarge...


Our Price $40 off >


Regular Price >





2.4GHz All-weather Daynight Two Camera Wireless Monitoring System


  • Remote Control allows you to switch between TWO cameras easily
  • Infrared light, night time recording and vision is not an issue!
  • Weatherproof, so you don’t have to worry about rain with this product as much as you would with another
  • Built-in High Sensitive microphone for audio monitoring
  • 9V Battery clip for Mobile video surveillance...Pocket size...Take it anywhere!



  • Transmission range in open space: up to 100m (300ft)
  • Transmission frequency: ISM 2.400 to 2.483GHz
  • Transmission power: 10mW/CE and 2mW/FCC
  • Operating frequency: 2,414, 2,432, 2,450 and 2,468MHz
  • Unobstructed effective range: 100m
  • Modulation mode: FM
  • Operating temperature: -10 to +50°C
  • Operating humidity: ≤85%RH
  • Imaging sensor: CMOS
  • Picture total pixels: PAL: 720 x 576 / NTSC: 720 x 480
  • Minimum illumination: 0Lux
  • Night vision range: 7m
  • Bandwidth: 18MHz
  • Current consumption: IR off: 160mA / IR on: 250mA
  • Power supply: +8V DC
  • Dimensions: (W) 45 x (D) 78 x (H) 83mm
  • Weight: 217g 


  • Antenna panel: 50Ω SMA
  • Receiving sensitivity: ≤-85dBm
  • Intermediate frequency: 480MHz
  • Video output signal level: 1.1Vpp±0.2Vpp, 75Ω
  • S/N ratio: >38dB
  • Audio output signal level: 3.0Vpp±1Vpp, 600Ω
  • Current consumption: 180mA
  • Power supply: +8V DC
  • Dimensions: (W) 77 x (D) 92 x (H) 22mm
  • Weight: 200g

Parts Included...*Specifications, parts, design may can be modified without prior notice.

  • 1 x 4-CH Wireless receiverclick to enlarge...
  • 1 x AC/ DC Adapter for receiver
  • 1 x AV Cable
  • 2 x Weatherproof Camera with Built-In Night Vision IR LED 
  • 2 x AC/ DC Adapter for cameras
  • 1 x Remote Control Unit
  • 2 x 9V Battery Clip for cameras
  • 1 x Quick Starter Guide

Radio Frequency Interferences...

As we all know publically, sharing radio frequencies that are considered part of the public band. We do not have entitlement and must accept interference if it exists.

Followings are home electronic devices that are most likely produce interferences and it would the best to prevent interferences if your wireless video device is installed at least 5 ~ 10ft away from them.

Example: Other 2.4GHz or 5.8GHz video transmitters in the area, 802.11b/g wireless data network, LAN or WAN, Cordless Phones, Data transceivers, wireless bar code readers, blue tooth devices, and Microwave ovens, etc.

*To download the step-by-step instruction manual, please request it via following email, support@EZspyCam.com along with your order ID# or Invoice#.
* Click the following link or paste it to you web browser to review Frequency Comparison Chart. http://www.EZspyCam.com/Download/Freq_Perform_Comparison.pdf

*Click the following link or paste to your web browser to review Samples of Installation Plan.
1-Year warranty will not cover if the equipment malfunctions that caused by improper installation.


Related Items

Wireless Daynight Video Alarm System

Wireless Micro Covert Video Kit

Portable 4-CH USB Wireless Spy Kit



Home | About Us | Contact Us | Tech-Support | Product | Directory